DIY Projects- Installing Corner Aluminium Extrusions Like a Pro

Corner aluminium extrusions are a versatile and stylish addition to any DIY project, from custom furniture to kitchen backsplashes. They provide a clean, finished look that can elevate the aesthetic of any space. However, installing corner aluminium extrusions can be a daunting task for beginners. Fortunately, with the right tools and techniques, it can be a straightforward process that even novice DIY enthusiasts can master.

Materials and Tools

Before embarking on your project, gather the following materials and tools:

Corner aluminium extrusions

Screws or rivets

Measuring tape

Pencil or marking tool

Drill or rivet gun

Safety glasses

Level (optional)

Measuring and Cutting

1. Measure and mark the location of the extrusions: Determine the desired placement of the extrusions and use a measuring tape and pencil to mark the corresponding locations on the substrate.

2. Cut the extrusions to length: Use a hacksaw or miter saw to cut the extrusions to the desired length. If using a miter saw, ensure the blade is set to a 45-degree angle for mitered corners.

Preparing the Substrate

1. Clean and level the surface: Ensure the substrate is clean and free of debris. If necessary, use a level to ensure the surface is level and flat.

2. Mark screw or rivet holes: Position the extrusions on the substrate and mark the locations for screws or rivets. Use a drill to create pilot holes for screws or use a punch to create dimples for rivets.

Installing the Extrusions

1. Align the extrusions: Carefully align the extrusions with the marked holes on the substrate. Use a level to ensure the extrusions are installed straight and level.

2. Secure the extrusions: Drive screws or insert rivets into the pilot holes or dimples to secure the extrusions to the substrate. Use caution not to overtighten the screws or rivets.

Finishing Touches

1. Trim excess material: Use a utility knife or flush-cut pliers to remove any excess material from the extrusions.

2. Clean the surface: Wipe down the extrusions and substrate with a damp cloth to remove any residual dust or debris.

By following these steps, you can install corner aluminium extrusions like a pro. With a little patience and attention to detail, you can create a custom look that will add a touch of elegance and functionality to your DIY projects.